PROFLEX Flooring Underlayment in Los Angeles, CA

ROFLEX™ 90 MSC Flooring Underlayment Los Angeles, CA

Features & Benefits:

PROFLEX™ 90 MSC reduces noise from impact, such as footfall, and reduces airborne sound transmission, such as noise from voices, TV’s and stereos.

Protects from Cracks – PROFLEX™ 90 MSC bridges cracks and controls joints up to 3/8” wide, eliminating the transfer of cracks to the finished flooring.

Not Condition Sensitive – PROFLEX™ 90 MSC may be installed in interior and exterior loca­tions. Also, PROFLEX™ may be installed in locations exposed to moisture.

Ease of Installation – PROFLEX™ 90 MSC is a peel and place application decreasing installa­tion time. Simply, roll out the product, measure and cut. Then peel the protective backing and place.

Why Architects in Los Angeles love Proflex MSC 90:

PROFLEX™ 90 MSC is a floor-soundproofing product for under tile, stone and hardwood finished floors. PROFLEX™ 90 MSC is a 90 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. PROFLEX™ 90 MSC is specially designed to be used under approved thin-sets, mortars, and adhesives for interior and exterior applications of ceramic tile, stone, and brick, and for interior applications of wood flooring to eliminate the transmission of cracks and to reduce sound transmission. Other applications also may be suitable. Contact our Acoustic Consultants for further information. To eliminate cracks in finished floor work, the product should be applied to the entire substrate prior to the installation of the finished flooring. This product must be used with PR11 Water Based Primer.

Other Places Architects such as Arquitectonica and HKS Architects have specified Proflex Products:

Why Owners and Developers Use Proflex 90 in Los Angeles?

PROFLEX™ 90 MSC is a self-bonding, reinforced, 90 mil-thick elastomeric crack isolation and sound reduction membrane. The mem­brane forms a permanent bond to concrete, steel, or wood substrates and is compatible with most cementious, epoxy, and urethane adhesives.

PROFLEX™ 90 MSC bridges cracks and controls joints up to 3/8” wide, eliminating the transfer of cracks to the finished flooring.

PROFLEX™ 90MSC is specially designed to be used under approved thin set mortars and adhesives for interior and exterior applica­tions of ceramic tile, stone, and brick, and for interior applications of wood flooring. Other applications also may be suitable. Con­tact our Acoustic Consultants for additional information.

PROFLEX™ 90 MSC sound reduction properties are for floors requiring a minimum Impact Insulation Class (IIC) of 68 and Sound Trans­mission Class (STC) of 72, as tested in accordance with American Society for Testing and Materials (ASTM) Standards E90-02, E989-89, and E492-90. Testing for PROFLEX™ 90MSC was conducted on 8” concrete slab with an acoustic ceiling.

PROFLEX™ 90 MSC offers limited warranty terms are up to ten (10) years, based on the system of materials used to install the fin­ished flooring products. Contact us for specific warranty terms and conditions.

Use with These Products:

PR11 Water Based Primer

Recommended Substrates:

May be applied over properly prepared substrates including (but not limited to): concrete slabs; pre-cast panels; lightweight top­pings; patching, leveling, and repair compounds; cement backer boards; terrazzo; ceramic tile; plywood; OS