PROFLEX RR-100

RR-100-FRONT-SLIDE2

RR-100

Proflex RR-100 is an advanced composite sound control underlayment utilizing a combination of 100% recycled products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings for use under LVT – Luxury Vinyl Tile. The product is also easy to install using a direct bond method, and is compatible with a variety of substrates and adhesives. You will find all PROFLEX products such as RR-100 in California, New York, Connecticut, Massachusetts, Rhode Island, New Hampshire, Maine and Vermont. Notable projects would be the towers at 201 Folsom St in San Francisco, CA.

TYPICAL USE:

Proflex RR-100 offers an industry leading sound reduction in a single layer membrane product. RR-100 typically meet or exceed most community building codes, developer, or condominium requirements. The product also installs quickly and minimizes transition issues.
In addition to the sound benefits. The product has been engineered and produced in a manor that meets several criteria supporting green / environmental building requirements. Using RR-100 products will assist a builder in qualifying for LEED™ Green Building Rating System.

ADVANTAGES:

  • Easy and fast to install with standard tools
  • Ready for tiling immediately after installation
  • Crack and joint isolation up to 3/8″
  • Crack Suppression
  • Sound Control

SUITABLE SURFACES:

  • Concrete (Poured, Pre-stressed, Precast)
  • Cured (Mortar Beds, Self Leveling Compounds, Gypcrete)
  • Concrete Backerboards
  • Wood (Exterior Grade Plywood, Hardwood, Tongue and Groove, OSB)

COVERAGES, PACKAGING:

  • 200 sq.ft. per roll
  • 2mm x 4′ x 50′ roll

PHYSICAL PROPERTIES AND TECHNICAL PERFORMANCE
Membrane Composition A material blend consisting primarily of recycled rubber
with naturally renewable granulated cork particles
Membrane Thickness 2mm (0.08in) thick.
SOUND REDUCTION PERFORMANCE DATA
(STC) Sound Transmission Class as tested to ASTME90-04 / E413-04
(IIC) Impact Insulation Class as tested to ASTM E492-04 / E 989-06
Delta IIC (Increase in Impact Insulation Class) as tested to ASTM E2179-03
STC rating 55dB
Tests were preformed as follows:
18 inch wood truss floor assembly with ceiling system, ¾” Gypsum Concrete pour, and a finished floor of 1/8”
luxury vinyl tile over Proflex RR-100 underlayment.

PACKAGING AND COVERAGES
PROFLEX RR-100
2mm x 48”x50’ 200 sq. ft per roll
10 rolls per pallet, 80lbs per roll.

COMPANION PRODUCTS:
PROFLEX PRO-STICK 77 adhesive
PROFLEX RCU adhesive
PROFLEX PWA 200 adhesive

Rating System in the following areas:

MR 4.1 5% Recycled Content of total building materials (post consumer + 1/2 of post industrial)
MR 4.2 10% Recycled Content of total building materials (post consumer + 1/2 of post industrial)
(RR products are approximately 80% post consumer and 10% post industrial recycled content by weight)
MR6 Specifying rapidly renewable building materials for 5% of total building materials
(RR products are approximately 10% rapidly renewing content by weight)
EQ 4.1 Low Emitting Materials, Adhesives, and Sealants (Adhesives Specified meet SCAQMD Rule 1168)